Live chat:

1300 737 976
Subscribe to our newsletter

Testimonials from our customers

Meg and Anna, Ritual Cryotherapy

“I just wanted to write to let you know how fantastic your technician Mike was today. He was incredibly helpful and went above and beyond to find a solution to our temperature sensor issue. We were very impressed with his professionalism and service. Many thanks again!”

Frank Ruzicka, Segment Sales Manager, Continental Pty Ltd

“I would like to congratulate Pyrosales for achieving 40 Years. It’s certainly a big achievement that Pyrosales shoud be very proud of. Congratulations for being an excellent vendor and supplying us high quality products. Best regards to the Pyrosales team.”

Grant Lynton, Electrician, Aspen Pharma Pty Ltd

“It’s been a pleasure dealing with Pyrosales over the years, as Sigma and now as Aspen. I’ve always had prompt professional service from you and had no reason to shop elsewhere.”

Andrew McKinnon, Andrew McKinnon Termite Inspections

“I recently purchased a FLIR i7 Thermal Imaging camera from Pyrosales in Sydney and can highly recommend them. I found both their before and after sale service second-to-none. They acted in both a professional and friendly manner, and were helpful in answering all of my questions.

I did make enquires with other firms before I purchased my Thermal Imaging camera, and even enquired overseas. However, I am very glad that I chose to deal with Pyrosales.

I would strongly recommend them to all in my industry and will be using them again myself for my next purchase. If I choose to drive over 2 hours to purchase with them, that must tell you how pleased I am with their service.”

Richard Day, Chief Design Engineer, Thermon Australia Pty Ltd

“Thermon have used Pyrosales for over 15 years as a sole supplier of temperature measurement equipment, and have found them to have all the qualities that you could expect in a manufacturer. These qualities include, but are not limited to, reliable, knowledgeable, expedient, cheerful and willing to go that little bit extra.

I would have no hesitation in recommending Pyrosales to anyone looking for a manufacturer of temperature measurement products.”

David Searson, Production Manager, York Precision Plastics

“I would recommend RKC controllers to anyone”

Mr David Searson, Production Manager at York Precision Plastics, has been using RKC controllers for 20 years. He called on Pyrosales to help him upgrade one of York’s Riverwood factory extrusion lines using the quality range of RKC melt pressure instruments. “When problems occur in plastics extrusion, you need to isolate the different factors one by one,” says David. “With RKC controllers, I can be sure that temperature and melt pressure control aren’t going to be a problem. You can’t go past RKC for precision and reliability.”

With the help of Pyrosales, David has installed an RKC HA930 melt pressure controller and MPI melt pressure probe into one of York’s existing extrusion lines. “With these components, we had our extruder up and running within two hours, and were soon extruding a high quality product” David says. “Our first production run operated on HIPS material from 7am till 9pm – 14 hours straight with no rejected sheets. Our shift was completed two hours earlier than would have been the case with the brand of controller we previously used. You can’t argue with results. I would definitely recommend RKC controllers to anyone in the plastics extrusion industry.”

Grant Gibson, Service Manager, Isothermal

“Pyrosales’ ability to understand our technical challenges, along with their industry knowledge, has allowed us to reduce our cost on sensors while gaining a higher quality, locally produced product.”

Jim McGowan, Technical Officer, Sydney Institute of TAFE- Gymea campus

“We’ve been really happy with the service we’ve received from Pyrosales. They’ve helped us to obtain all the materials we need for teaching, including information resources and visual aids. Now that we have a reliable distributor, Pyrosales has a future in the TAFE syllabus.”

Peter Hay, DTS Food Laboratories

“I am particularly pleased with the build quality of the current thermocouple – where many of our other thermocouple have flimsy connections to the plug, this one has performed perfectly for three years, a testament to your company.”